Delegate Interrupt Mode; Am 6040 Ambient Microphone Unit - Shure DCS 6000 User Manual

DIS Digital Conference System
Web Browser Setup and Control'), where
default is 4 seconds.
The microphone can also be turned off by
activating the 'Speak' button.
A Chairman Unit can be considered as always
being in Auto or VOX mode
The "Delegate Interrupt" setting determines the
6.6.2

Delegate Interrupt Mode

behavior of the delegate Conference units.
None When "None" is selected and the
number of open Delegate units has reached
•
the number specified in the setting "Max.
Delegate Speakers"
microphone can be opened. Pressing the
microphone buttons will not turn on the
microphone but 3 flashes in the green LED
will indicate, that the maximum number has
been reached.
It is similar for Chairman units if the number
of open units (Chairman and Delegate) has
reached the number specified in the setting
"Max. Total Speakers".
Lower If however "Lower" is selected a
chairman will interrupt (switch off) the first
•
switched on delegate unit if the number of
open units (Chairman and Delegate) has
reached the number specified in the setting
"Max. Total Speakers".
44
no more delegate
User Manual CU 6110 rev A.docx
Lower+Same If "Lower+Same" is selected a
delegate unit will interrupt (switch off) the
•
first switched on delegate unit if the number
of delegate units has reached the number
specified in the setting "Max. Delegate
Speakers".
Similar a chairman will interrupt (switch off)
the first switched ON delegate unit if the
number of open units (Chairman and
Delegate) has reached the number specified
in the setting "Max. Total Speakers", and if no
delegate unit is switched ON the first
switched ON Chairman unit will be switched
OFF.
6.7 AM 6040 Ambient
The purpose of an ambient microphone unit is to
Microphone Unit
provide sound from a meeting room/conference
hall, when there is no delegate/chairman using
their microphones.
Transmission of ambient noise rather than
transmitting no sound at all is a desirable feature
from listeners attending the meeting via
headphones. The ambient noise indicates to the
listeners, that there is no speaking activity going
on, and this information is very nice to have,
when interpreters are doing interpretation, and
the speaker stops speaking.
User Manual