Service The Parksense® Rear Park Assist System; Parksense® System Usage Precautions - Chrysler Grand Voyager 2015 Manual

Table of Contents

Advertisement

Arcs
Radio Volume Re-
duced
NOTE:
ParkSense® will reduce the radio volume, if
on, when the system is sounding an audio
tone.
Enabling/Disabling ParkSense®
ParkSense® can be enabled and disabled
through the Customer-Programmable Features
section of the EVIC. The available choices are:
OFF, Sound Only, or Sound and Display. Refer
to "Electronic Vehicle Information Center
(EVIC)/Personal
Settings
Programmable Features)" in "Understanding
Your Instrument Panel" for further information.
When ParkSense® is disabled, the instrument
cluster will display the "PARK ASSIST SYSTEM
OFF" message for approximately five seconds.
Refer to "Electronic Vehicle Information Center
(EVIC)" in "Understanding Your Instrument
Panel" for further information. When the shift
None
3 Solid
(Continuous)
No
Yes
lever is moved to REVERSE and the system is
disabled, the EVIC will display the "PARK AS-
SIST SYSTEM OFF" message for as long as
the vehicle is in REVERSE.
Service The ParkSense® Rear Park
Assist System
During vehicle start up, when the ParkSense®
Rear Park Assist System has detected a faulted
condition, the instrument cluster will actuate a
single chime, once per ignition cycle, and it will
(Customer-
display the "SERVICE PARK ASSIST SYSTEM"
message. Refer to "Electronic Vehicle Informa-
tion Center (EVIC)" in "Understanding Your In-
strument Panel" for further information. When
the shift lever is moved to REVERSE and the
system has detected a faulted condition, the
EVIC will display the "SERVICE PARK ASSIST
SYSTEM" message for as long as the vehicle is
in
REVERSE.
ParkSense® will not operate.
3 Slow
Flashing
Yes
Under
this
condition,
2 Slow
Flashing
Yes
If "SERVICE PARK ASSIST SYSTEM" appears
in the Electronic Vehicle Information Center
(EVIC) after making sure the rear fascia/
bumper is free from snow, ice, mud, dirt and
debris, see your authorized dealer.
Cleaning The ParkSense® System
Clean the ParkSense® sensors with water, car
wash soap and a soft cloth. Do not use rough or
hard cloths. Do not scratch or poke the sensors.
Otherwise, you could damage the sensors.
ParkSense® System Usage
Precautions
NOTE:
• Ensure that the rear bumper is free of
snow, ice, mud, dirt and debris to keep the
ParkSense® system operating properly.
1 Slow
Flashing
Yes
143

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents