Vehicle Specifications - Chrysler Grand Voyager 2015 Manual

NOTE:
• If a screwdriver is used, make sure a soft
material is placed between the vehicle
body and tool so not to scratch the paint.
• The PRY location is best closest to the
studs while dislodging them separately.
3. Twist the socket and remove it from the lamp
assembly.
4. Pull the bulb to remove it from the socket.
5. Replace the bulb, reinstall the socket, and
reattach the lamp assembly.
Center High-Mounted Stop Lamp
(CHMSL)
The CHMSL uses LED lamps that are not
serviceable separately. The CHMSL must be
replaced as an assembly, see your authorized
dealer.
338
License Lamp
The license plate lamp is located under the
tailgate light bar and above the license plate.
1. Using a small screwdriver, press inward the
locking tab on the outboard side of the lamp
assembly and pull down on the lamp assem-
bly for removal.
2. Twist and remove the socket from the lamp
assembly and pull the bulb out to remove.
3. Push the bulb into the socket, twist the
socket into the lamp assembly and reinstall
the lamp assembly into place ensuring the
locking tab is secure.

VEHICLE SPECIFICATIONS

Engine
Power 150 kW @ 5,000 rpm
Torque 319 N.m @ 4,000 rpm
Maximum Consult Your
Vehicle Speed Salesperson
NOTE:
A chime will sound if the vehicle speed
exceeds 75 mph (120 km/h). It will continue
to chime until the vehicle speed is reduced
below 75 mph (120 km/h).
3.6L