Chrysler Grand Voyager 2015 Manual page 723

Tilt Mirrors In Reverse (Available
With Memory Seat Only) — If
Equipped
Tilt Mirrors in Reverse provides automatic out-
side mirror positioning which will aid the drivers
view of the ground rearward of the front doors.
The driver's outside mirror will move slightly
downward from the present position when the
vehicle is shifted into REVERSE. The driver's
outside mirror will then return to the original
position when the vehicle is shifted out of RE-
VERSE position. Each stored memory setting
will have an associated Tilt Mirrors in Reverse
position.
NOTE:
The Tilt Mirrors in Reverse feature is not
enabled when delivered from the factory.
The Tilt Mirrors in Reverse feature can be
enabled or disabled in the Electronic Vehicle
Information Center (EVIC). Refer to "Elec-
tronic Vehicle Information Center (EVIC)/
Customer-Programmable Features" in "Un-
derstanding Your Instrument Panel" for
further information.
Power Folding Mirrors — If
Equipped
The switch for the power folding mirrors is
located between the power mirror switches L
(left) and R (right). Press the switch once and
the mirrors will fold in, pressing the switch a
second time will return the mirrors to the normal
driving position.
Power Folding Mirror Switch
NOTE:
If the vehicle speed is greater than 10 mph
(16 km/h) the folding feature will be disabled.
If the mirrors are in the folded position, and
vehicle speed is equal or greater than 10 mph
(16 km/h), they will automatically unfold.
Resetting The Power Folding Outside Mir-
rors
You may need to reset the power folding mirrors
if the following occurs:
• The mirrors are accidentally blocked while
folding.
• The mirrors are accidentally manually
folded/unfolded.
• The mirrors come out of the unfolded
position.
• The mirrors shake and vibrate at normal
driving speeds.
To reset the power folding mirrors: Fold and
unfold them by pressing the button. (This may
require multiple button pushes). This resets
them to their normal position.
81