Chrysler Grand Voyager 2015 Manual page 607

Table of Contents

Advertisement

lects the appropriate mode after the disc is
recognized and starts playing the Blu-ray™
Disc.
NOTE:
The Blu-ray™ Player has basic control func-
tions such as Menu, Play, Pause, FF, RW and
Stop.
2. To watch a Blu-ray™ Disc on Screen 1 for
second row passengers, ensure the Remote
Control and Headphone switch is on Chan-
nel 1.
3. To watch a Blu-ray™ Disc on Screen 2 for
third row passengers, ensure the Remote
Control and Headphone switch is on Chan-
nel 2.
Using The Remote Control
1. Push the SOURCE button on the Blu-ray™
Player Remote Control.
2. While looking at Screen 1 or 2, highlight
Blu-ray™ by either pushing Up/Down/Left/
Right buttons or by repeatedly pushing the
SOURCE button, then push OK on the Re-
mote Control.
NOTE:
• Channel/Screen 1 select mode informa-
tion is shown on the left side of the
screen.
• Channel/Screen 2 select mode informa-
tion is shown on the right side of the
screen.
• The VES™ will retain the last setting when
turned off.
Using The Touchscreen Radio Controls
1. Push the MENU button on the radio face-
plate.
2. Press the Rear VES™ button on the touch-
screen to display the Rear VES™ Controls.
If a channel list is displayed, press the HIDE
LIST button on the touchscreen to display
the Rear VES™ Controls screen.
3. Press the 1 or 2 button on the touchscreen
and then the VES™ Disc button on the
touchscreen in the VES™ column. To exit
press the back arrow button at the top left of
the screen.
NOTE:
• To view a Blu-ray™ Disc on the radio,
push the RADIO/MEDIA button on the ra-
dio faceplate, then press the VES™ Disc
tab button on the touchscreen and then
the VIEW VIDEO button on the touch-
screen.
• Viewing a Blu-ray™ Disc on the Touch-
screen radio screen is not available in all
states/provinces. If available, the vehicle
must be stopped and the shift lever must
be in the PARK position for vehicles with
an automatic transmission. In vehicles
with a manual transmission the parking
brake must be engaged.
Listen To An Audio Source While A
Video Is Playing
Ensure the Remote Control and Headphone
switch are on the same channel. If watching a
video on Screen 1 (second row), then Channel
197

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents