Advanced Phone Connectivity - Chrysler Grand Voyager 2015 Manual

NOTE:
Certain brands of mobile phones do not
send the dial ring to the Uconnect® Phone
to play it on the vehicle audio system, so
you will not hear it. Under this situation,
after successfully dialing a number the user
may feel that the call did not go through
even though the call is in progress. Once
your call is answered, you will hear the
audio.
Mute/Un-Mute (Mute Off)
When you mute the Uconnect® Phone, you will
still be able to hear the conversation coming
from the other party, but the other party will not
be able to hear you.
To mute the Uconnect® Phone using Voice
Command:
1. Push the Voice Command
2. Following the beep, say "Mute."
To un-mute the Uconnect® Phone using Voice
Command:
1. Push the Voice Command
2. Following the beep, say "Mute off."

Advanced Phone Connectivity

Transfer Call To And From Mobile Phone
The Uconnect® Phone allows ongoing calls to
be transferred from your mobile phone to the
Uconnect® Phone without terminating the call.
To transfer an ongoing call from your
Uconnect® Phone paired mobile phone to the
Uconnect® Phone or vice versa using Voice
Command:
1. Push the Voice Command
say "Transfer Call."
Connect Or Disconnect Link Between The
Uconnect® Phone And Mobile Phone
Your mobile phone can be paired with many
different electronic devices, but can only be
actively connected with one electronic device at
button.
a time.
If you would like to connect or disconnect the
Bluetooth® connection between a Uconnect®
Phone paired mobile phone and the Uconnect®
Phone, follow the instructions described in your
button.
mobile phone User's Manual.
List Paired Mobile Phone Names
To hear a list of Uconnect phone paired mobile
phones using Voice Command:
1. Push the Phone
2. After the "Ready" prompt and the following
beep, say "Setup Phone Pairing."
3. When prompted, say "List Phones."
• The Uconnect® Phone will play the phone
names of all paired mobile phones in order
from the highest to the lowest priority.
button and
To "select" or "delete" a paired phone being
announced:
1. Push the Voice Command
say "Select" or "Delete."
• See the next two sections for an alternate
way to "select" or "delete" a paired phone.
Select Another Cellular Phone
This feature allows you to select and start using
another phone paired with the Uconnect®
Phone.
button to begin.
button and
97