Replacing The Remote Control Batteries - Chrysler Grand Voyager 2015 Manual

• Pushing the Video Lock again or turning the
ignition OFF turns Video Lock OFF and al-
lows remote control operation of the VES™.
Replacing The Remote Control
Batteries
The remote control requires two AAA batteries
for operation. To replace the batteries:
• Locate the battery compartment on the back
of the remote, then slide the battery cover
downward.
• Replace the batteries, making sure to orient
them according to the polarity diagram
shown.
• Replace the battery compartment cover.
Headphones Operation
The headphones receive two separate chan-
nels of audio using an infrared transmitter from
the video screen.
Front seat occupants receive some headphone
audio coverage to allow them to adjust the
202
headphone volume for the young rear seat
occupants that may not be able to do so for
themselves.
If no audio is heard after increasing the volume
control, verify that the screen is turned on and in
the down position and that the channel is not
muted and the headphone channel selector
switch is on the desired channel. If audio is still
not heard, check that fully charged batteries are
installed in the headphones.
VES™ Headphones
1 — Volume Control 3 — Channel Selection
Switch
2 — Power Button 4 — Power Indicator
Blu-ray™ Headphones Operation
The headphones receive two separate chan-
nels of audio using an infrared transmitter from
the video screen.
Front seat occupants receive some headphone
audio coverage to allow them to adjust the
headphone volume for the young rear seat
occupants that may not be able to do so for
themselves.
If no audio is heard after increasing the volume
control, verify that the screen is turned on and in
the down position and that the channel is not
muted and the headphone channel selector
switch is on the desired channel. If audio is still
not heard, check that fully charged batteries are
installed in the headphones.