Chrysler Grand Voyager 2015 Manual page 617

been activated or the check-mark is removed
showing the system has been deactivated.
Keyless Enter-N-Go™ (Passive Entry) — If
Equipped
This feature allows you to lock and unlock the
vehicle's door(s) without having to push the
RKE transmitter lock or unlock buttons. To make
your selection, push and release the SELECT
button until a check-mark appears next to the
feature showing the system has been activated
or the check-mark is removed showing the
system has been deactivated. Refer to "Keyless
Enter-N-Go™" in "Things To Know Before Start-
ing Your Vehicle".
Easy Exit Seat
This feature provides automatic driver seat po-
sitioning to enhance driver mobility when enter-
ing and exiting the vehicle. To make your selec-
tion, push and release the SELECT button until
a check-mark appears next to the feature show-
ing the system has been activated or the check-
mark is removed showing the system has been
deactivated.
NOTE:
The seat will return to the memorized seat
location (if Recall Memory with Remote Key
Unlock is set to ON) when the RKE transmit-
ter is used to unlock the door. Refer to
"Driver Memory Seat" in "Understanding
The Features Of Your Vehicle" for further
information.
Tilt Mirror In Reverse — If Equipped
When this feature is selected and the vehicle is
placed in a reverse gear, the driver's side mirror
will tilt downward to allow the driver to see into
the previous blind spot and avoid objects in
close proximity to the rear of the vehicle. To
make your selection, push and release the
SELECT button until a check-mark appears
next to the feature showing the system has
been activated or the check-mark is removed
showing the system has been deactivated.
Blind Spot Alert — If Equipped
There are three selections when operating Blind
Spot Alert ("Blind Spot Alert Lights", "Blind Spot
Alert Lights/CHM", "Blind Spot Alert Off"). The
Blind Spot Alert feature can be activated in
"Blind Spot Alert Lights" mode, when this mode
is selected the Blind Spot Monitor (BSM) sys-
tem is activated and will only show a visual alert
in the outside mirrors. The Blind Spot Alert
feature can be activated in "Blind Spot Alert
Lights/CHM" mode, in this mode the Blind Spot
Monitor (BSM) will show a visual alert in the
outside mirrors as well as an audible alert when
the turn signal is on. When "Blind Spot Alert Off"
is selected the Blind Spot Monitor (BSM) sys-
tem is deactivated.
To make your selection, push and release the
SELECT button until a check-mark appears
next to the feature showing the system has
been activated or the check-mark is removed
showing the system has been deactivated.
NOTE:
If your vehicle has experienced any damage
in the area where the sensor is located, even
if the fascia is not damaged, the sensor may
have become misaligned. Take your vehicle
to an authorized dealer to verify sensor
alignment. Having a sensor that is mis-
aligned will result in the BSM not operating
to specification.
187