Chrysler Grand Voyager 2015 Manual page 615

Table of Contents

Advertisement

Once the audio device is connected and syn-
chronized to the vehicle's iPod®/USB/MP3 con-
trol system (iPod® or external USB device may
take a few minutes to connect), the audio
device starts charging and is ready for use by
pressing radio switches, as described below.
NOTE:
If the audio device battery is completely
discharged, it may not communicate with
the iPod®/USB/MP3 control system until a
minimum charge is attained. Leaving the
audio
device
connected
iPod®/USB/MP3 control system may charge
it to the required level.
Using This Feature
By using an iPod® cable, or an external USB
device to connect to the USB port:
• The audio device can be played on the
vehicle's sound system, providing metadata
(artist, track title, album, etc.) information on
the radio display.
• The audio device can be controlled using the
radio buttons to Play, Browse, and List the
iPod® contents.
• The audio device battery charges when
plugged into the USB/AUX connector (if sup-
ported by the specific audio device).
Controlling The iPod® Or External
USB Device Using Radio Buttons
To enter the iPod®/USB/MP3 control mode and
access a connected audio device, either push
the "AUX" button on the radio faceplate or push
to
the
the VR button and say "USB" or "Switch to
USB." Once in the iPod®/USB/MP3 control
mode, audio tracks (if available from audio
device) start playing over the vehicle's audio
system.
Play Mode
When switched to iPod®/USB/MP3 control
mode, the iPod® or external USB device auto-
matically starts Play mode. In Play mode, the
following buttons on the radio faceplate may be
used to control the iPod® or external USB
device and display data:
• Use the TUNE control knob to select the next
or previous track.
• Turning it clockwise (forward) by one
click, while playing a track, skips to the
next track or push the VR button and say
"Next Track."
• Turning it counterclockwise (backward)
by one click, will jump to the previous
track in the list or push the VR button and
say "Previous Track."
• Jump backward in the current track by push-
ing and holding the << RW button. Holding
the << RW button long enough will jump to
the beginning of the current track.
• Jump forward in the current track by pushing
and holding the FF>> button.
• A single push backward << RW or forward
FF>> will jump backward or forward respec-
tively, for five seconds.
• Use the << SEEK and SEEK >> buttons to
jump to the previous or next track. Pushing
the SEEK >> button during play mode will
jump to the next track in the list, or push the
VR button and say "Next or Previous Track."
189

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents