Multifunction Lever; Turn Signals - Chrysler Grand Voyager 2015 Manual

The Halo control switch is located to the right of
the dimmer switch.
Halo Control
To activate the Halo lights, rotate
the Halo switch control upward or
downward to increase or decrease
the lighting.
132

Multifunction Lever

The multifunction lever is located on the left side
of the steering column.
Multifunction Lever
The multifunction lever controls the:

• Turn Signals

• Headlight Beams Low/High
• Flash-To-Pass
• Front and Rear Wipers — Washer Functions
Turn Signals
Move the multifunction lever up or down and the
arrows on each side of the instrument cluster
flash to show proper operation of the front and
rear turn signal lights.
NOTE:
If either light remains on and does not flash,
or there is a very fast flash rate, check for a
defective outside light bulb. If an indicator
fails to light when the lever is moved, it
would suggest that the indicator bulb is
defective.
Turn Signal Warning
If the vehicle electronics sense that the vehicle
has traveled at over 18 mph (29 km/h) for about
1 mile (1.6 km) with the turn signals on, a chime
will sound to alert the driver.
Lane Change Assist
Tap the lever up or down once, without moving
beyond the detent, and the turn signal (right or
left) will flash three times then automatically turn
off.