Table of Contents
Advertisement
Troubleshooting
Malfunction table
Problem
The oven does not work.
0 and zeros light up in the
display.
The oven does not heat up.
Error messages
36
Fitting the door panel
1. Slide in the door panel as far as the stop.
2. Fit the cover and screw it in place.
3. Refit the appliance door.
Malfunctions often have simple explanations. Before
you call the after sales service, please try to rectify the
fault yourself using the table.
If a dish doesn't turn out as well as you had hoped,
have a look in the Tested for you in our cooking
studio section. There you will find many tips and
information about cooking.
Possible cause
Blown fuse.
Power cut.
Power cut.
There is dust on the
contacts.
If an error message with “ appears in the display,
press the 0 button. The message disappears. Any
time function that has been set is cleared.
If an error message does not disappear, call the
after sales service.
You can provide a remedy yourself for the following
error message.
Remedy/information
Look in the fuse box and check that
the fuse is in working order.
Check whether the kitchen light or
other kitchen appliances are working.
Reset the clock.
Turn the control knobs backwards
and forwards several times.
Advertisement
Table of Contents
