Bosch HBM 43B550 A Instruction Manual page 22

The cooking time has
elapsed
Changing the end time
Cancelling the end time
22
6. Use the @ or A button to delay the end time.
After a few seconds, the oven adopts the settings and
switches to standby position. The display shows the
time at which the dish will be ready and the symbol p
is in brackets. The U and 0 symbols go out.
When the oven starts, the cooking time counts down
in the display and the r symbol is shown in brackets.
The symbol p goes out.
A signal sounds. The main oven stops heating.
00:00 is shown in the display.
Press the 0 button. The @ or A button can be used
to set a new cooking time.
Or press the 0 button twice and turn the function
selector to the off position. The oven is switched off.
Use the @ or A button to change the end time.
After a few seconds, the change is adopted.
If the timer has been set, first press the 0 button
twice.
Do not change the end time if the cooking time has
already started to count down. The cooking result
would no longer be correct.
Use the A button to set the end time back to the
current time. After a few seconds, the change is
adopted. The main oven starts.
If the timer has been set, first press the 0 button
twice.