Setting - Bosch HBM 43B550 A Instruction Manual

Setting

ó main oven
26
1. Set the function selector for the main oven to
< 3D hot air.
2. Set the temperature selector to s.
3. Press the u button.
Cleaning takes approximately one hour.
In the display, the u symbol lights up. The time
at which the cleaning will finish appears and the
p symbol is shown in brackets.
Cleaning will start up after a few seconds. You can
see the cleaning time count down, and the r symbol
is shown in brackets. The symbol p goes out.
Cleaning is finished
A signal sounds. The oven stops heating. 00:00 is
shown in the display.
Press the 0 button twice and turn the function
selector to the off position. The oven is switched off.
Cancelling cleaning
Press the u button twice and turn the function
selector to the off position. The oven is switched off.
Changing the end time
You can postpone the time at which cleaning ends for
the main oven. This allows the cleaning programme
to run at night, for instance, so that you can use your
oven during the day.
Make the settings as described in steps 1 to 3.
Before cleaning starts, make the end time later using
the @ or A button.
The main oven switches to standby. The display
shows the time at which the cleaning will finish and
the p symbol is shown in brackets.
When cleaning starts, the cooking time counts down
in the display and the r symbol is shown in brackets.
The symbol p goes out.