Measurements; Selecting The Correct Cuff Size; Applying The Arm Cuff - AND UM-211 Instruction Manual

Selecting the Correct Cuff Size

Using the correct cuff size is important for an accurate reading. If the cuff is not
the proper size, the reading may yield an incorrect blood pressure value.
The arm size is printed on each cuff.
The arm cuff is a consumable. If it becomes worn, purchase a new one.
Arm Size
41cm to 50cm
31cm to 45cm
22cm to 32cm
16cm to 24cm
12cm to 17cm
Arm size: The circumference of the biceps.

Applying the Arm Cuff

1. Face the palm of the left arm upward,
and wrap the cuff around the upper arm,
about 1-2 cm above the inside of the
elbow.
A range where the INDEX mark can be
overlapped on the RANGE mark shows
a proper fit range for the cuff.
2. Place the cuff on the upper arm so that
the mark is overlapped on the artery.
3. Wrap while keeping the looseness with
the cuff around the upper arm so that it
allows the one or two fingers to insert
between the cuff and arm.
Printing contents with the cuff
Symbols
REF
INDEX
ARTERY
LATEX FREE
LOT

Measurements

Cuff Size
LL cuff
LA cuff
A cuff
SA cuff
SS cuff
Means a code for when ordering the cuff to the manufacture.
Index symbol
Means the symbol for showing that the cuff is wrapped in a
proper fit range if this symbol is within the RANGE line.
ARTERY symbol
Place this symbol on the artery at the upper arm or thigh.
Means the symbol for showing that the latex is not included in
this product.
Means the symbol for showing the conformability mark.
Means the symbol for showing a lot number for when
manufacturing.
The lot number is printed by the carved seal around this mark.
English 21
Symbols
LL
LARGE ADULT
ADULT
SMALL ADULT
SS
Do not roll up shirtsleeve tightly.
Artery position mark
1-2 cm
Descriptions
Catalog Number
CUF-KS-LL
CUF-KS-LA
CUF-KS-A
CUF-KS-SA
CUF-KS-SS
Cuff
Air Hose