How To Take Accurate Measurements; Measurement; After Measurement - AND UA-767JP Instruction Manual

How to Take Accurate Measurements

For the most accurate blood pressure measurement:
Sit comfortably on a chair. Rest your arm on the table. Do not cross your
legs. Keep your feet on the floor and straighten your back.
Relax for about five to ten minutes before measurement.
Place the center of the cuff at the same height as your heart.
Remain still and keep quiet during measurement.
Do not measure immediately after physical exercise or a bath. Rest for
twenty or thirty minutes before taking the measurement.
Try to measure your blood pressure at the same time every day.

Measurement

During measurement, it is normal for the cuff to feel very tight. (Do not be
alarmed).

After Measurement

After measurement, press the
one minute of non-operation, the device will turn off automatically.
Remove the cuff and record your data.
Note: Allow at least three minutes between measurements on the same person.
Using the Monitor
START
English 15
button to turn the device off. After