Measurements - AND UB-543 Instruction Manual

Measurements

Note: The UB-543, once used, will provide an inflation appropriate to the user.
1. Wrap the cuff around your wrist. Sit comfortably with the cuff at the
same level as your heart and relax.
2. Press the START button. All of the display segments are displayed.
3. Select a user from user and user
immediately. Adjust and keep the height of the cuff (with blue light) to
the same level as your heart using the C.P.G. indicator.
Note: If you do not use user selection, wait for the inflation for several seconds. If you do not
use the C.P.G. function, the C.P.G. indicator is not displayed.
4. Zero (0) is displayed blinking briefly. Then the display changes, as
measurement begins. The cuff starts to inflate. It is normal for the cuff
to feel very tight. The measurement starts automatically when inflation
starts, and the (heart mark) blinks.
Note: If you wish to stop inflation at any time, press the START button again.
5. When the measurement is complete, the device displays readings
(of the systolic and diastolic pressure readings, pulse rate, WHO
classification, I.H.B. symbol and C.P.G. indicator). While readings
are displayed, the date and time are displayed alternately. The cuff
exhausts the remaining air and completely deflates automatically.
Note: If you do not want to store new readings in memory, press the
are displayed.
6. Press the START button again to turn the device off. Remove the cuff.
Note: The device is provided with an automatic power shut-off function. Allow at least one
minute between measurements on the same person.
SET button
using the
button while readings
All segments
User or user :
The C.P .G. indicator: Orange Blue Orange
LOW LEVEL HIGH
At heart level
Zero display
Inflation is started
Inflating and
Measurement in progress
Systolic pressure
Diastolic pressure
AHA classification
I.H.B. symbol
Pulse rate
The C.P .G. indicator
button
SET
E-14