Symbols - AND UM-211 Instruction Manual

Symbols

Symbols that are printed on the device case and the AC adapter
Symbols Function / Meaning Recommended Action
The blood pressure measurement is
started when the START/STOP button
is pressed at the standby mode.
The blood pressure measurement is stopped
when the START/STOP button is pressed
during measuring the blood pressure.
The device proceeds to standby mode
when the START/STOP button is
pressed for at least three seconds.
SYS Systolic blood pressure in mmHg
DIA Diastolic blood pressure in mmHg
PUL Pulse per minute
Direct current
Serial number
SN
Date of manufacture
Type BF: Device, cuff and tubing are
designed to provide special protection
against electrical shocks.
EC directive medical device label
WEEE label
Manufacturer
EU-representative
Refer to instruction manual/booklet
Class II device
Polarity of DC jack
UL Recognized Component Marks for
Canada and the United States
Do Not Dissasemble
Indoor Dry Location Use Only
Consult the instruction manual
PSE Recognized Component
Warnig-Hot surface
English 7