Clock Display Setting; Auto Power Off Time Setting - AND UM-211 Instruction Manual

Clock display setting

1. Press the MODE button when the
minute at the clock setting is being set
to go into clock display setting mode.
The "F11" is displayed at the display
for systolic pressure, and the "12H"
or "24H" is displayed at the display
for diastolic pressure.
2. Press to
between 12H or 24H.
Press the MODE button to proceed to
auto power OFF time setting mode.
Press the START/STOP button to
proceed to standby mode.

Auto power OFF time setting

Set a time for timeout for when no operation is made. Either of five or ten
minutes can be selected.
1. Press the MODE button at the clock
display setting mode to go into auto
power OFF time setting mode.
The "F12" is displayed at the display
for systolic pressure, and the "5" or
"10" is displayed at the display for
diastolic pressure.
2. Press to
between five or ten minutes.
3. Press the MODE button to proceed to
room temperature unit changing mode.
Press the START/STOP button to
proceed to standby mode.
or button to switch
or button to switch
Auto power OFF
time setting mode
Room temperature
unit changing
mode
English 17
START
STOP
Standby mode
START
STOP
Standby mode