Room Temperature Unit Changing; Pressure Confirmation Mode - AND UM-211 Instruction Manual

Room temperature unit changing

A unit for displayed room temperature can be switched between °C or °F.
1. Press the MODE button at the auto
power OFF time setting mode to go
into room temperature unit changing
mode.
The "F14" is displayed at the display
for systolic pressure.
2. Press to
between °C or °F at the right end on
the display to switch a unit for room
temperature.
3. Press the MODE button to proceed to
Pressure confirmation mode. Press the
START/STOP button to complete the
setting. The
standby mode.

Pressure confirmation mode

1. Press the
temperature unit changing mode to go into
pressure confirmation mode.
The current pressure value is displayed at
the display for systolic pressure and
diastolic pressure.
2. When the pressure reaches 320mmHg or
higher, the value indicated on the display
flashes 320mmHg. After that, the display
returns to previous one when the pressure
display is less than 320mmHg.
3. Press the MODE button to proceed to clock
setting mode. Press the START/STOP
button to complete the confirmation. The
device proceeds to standby mode.
or button to switch
device proceeds
MODE button
to
at the
English 18
C
Pressure
confirmation mode
Clock setting mode
F