Measurement With The Set Pressure - AND UM-211 Instruction Manual

Model UM-211 is designed to detect the pulse and to inflate the cuff to a
systolic pressure level automatically.
If re-inflation occurs repeatedly, use the following methods.

Measurement with the SET Pressure

During the blood pressure measurement, re-inflation may occur.
A fixed pressure value can be set to avoid re-inflation.
1. Press the MODE button to go to the
pressurization value setting mode. The
current setting blinks.
2. Press the
value about 30 mmHg or more above your
expected systolic pressure from the following.
AUTO : Automatic pressurization (default value)
220 : Pressure value of 220 mmHg (fixed)
250 : Pressure value of 250 mmHg (fixed)
280 : Pressure value of 280 mmHg (fixed)
3. Press the MODE button to go to the
auscultation setting mode.
Press the START/STOP button to start the
measurement. The device will proceed to
standby mode
operation is made for a regular time.
The next measurement will be performed
with the new pressure value.
or button to select a pressure
automatically when no
The measurement
is started.
English 14
or
START
STOP
Auscultation
setting mode