Power In Connection - Lindy SC5-4xIP User Manual

Power in connection

The SC5-4xIP unit is powered by the supplied
5V power adapter. There is no on/off switch
on the unit, so operation begins as soon as a
power adapter is connected.
To connect the power supply
1 Attach the output lead from the power adapter to the
panel of the SC5-4xIP.
5 V
4 . 0
A
output lead from
power adapter
LOCAL
USER
POWER
IN
CAM
COMPUTER
SYSTEM
socket on the rear
5V
SC-xIP rear panel
O P
T I O
N S
1 6
1
1 2
C O
1
M P
U T
2 Connect the IEC connector of the supplied country-specific power lead to
GLOBAL
USERS
the socket of the power adapter.
IP
3 Connect the power lead to a nearby main supply socket.
Note: Both the SC5-4xIP and its power supply generate heat when in operation
and will become warm to the touch. Do not enclose them or place them in
locations where air cannot circulate to cool the equipment. Do not operate
the equipment in ambient temperatures exceeding 40 degrees Centigrade. Do
not place the products in contact with equipment whose surface temperature
exceeds 40 degrees Centigrade.