Hardware Installation; Installing The Antenna; Connecting The Ethernet Cable; Connecting The Power Supply - Lindy 42449 Quick Installation Manual

Quick Installation Guide
2

Hardware Installation

Attaching the Camera Stand
The Wireless Internet Camera comes with
a camera stand, which has a swivel ball
screw head that can be attached to the
camera's screw hole on the top/bottom
panel. Attach the camera stand to the
camera and station it for your application.

Installing the Antenna

Connect an Ethernet cable to the network
cable connector located on the camera's
rear panel, and then connect it to the
network.

Connecting the Ethernet Cable

Connect an Ethernet cable to the network
cable connector located on the camera's
rear panel, and then connect it to the
network.

Connecting the Power Supply

Connect the external power supply to the
DC power input connector located on the
camera's rear panel, and then connect it
to your wall outlet. (
Tip: You can confirm
the power source is supplied from the
Power LED on the camera.
)
2