Table of Contents
Advertisement
Serial Configuration
This page allows you to configure the
OPTIONS serial port located at the rear of the
SC5-4xIP.
To get here
1 From a local keyboard, log on as the
'admin' user.
2 Press
(hotkeys can change).
3 Press
to show the Main Menu.
4 Select 'Configuration' and press
5 Select 'Serial Configuration' & press
Options Port
Settings: Power Control, Sync Units, Console Server
Determines whether the OPTIONS port at the rear of the unit will be used for
connection to power control switches ('Power Control'), to synchronise the
operation of two SC5-4xIP units ('Sync Units') or to operate as a 'Console Server'
connection to link with other devices that are configured/monitored via their
serial ports.
Options Baud
Settings: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Determines the communication speed of the OPTIONS port when the above
setting is configured to 'Power Control'. The other communication settings are
fixed as: No parity, 8 bit word, 1 stop bit.
Notes:
When 'Options Port' is set to 'Sync Units', the baud rate will be automatically
changed to 19200.
When the 'Options Port' is set to 'Console Server', the baud rate and other
parameters are set within the
Console Server Configuration
.
.
page for Port 0.
Advertisement
Table of Contents
