Global Users (Ip Network Port) - Lindy SC5-4xIP User Manual

Global users (IP network port)

The SC5-4xIP provides an autosensing Ethernet
IP port that can operate at 10 or 100Mbps,
according to the network speed. The SC5-4xIP
is designed to reside quite easily at any part of
your network:
• It can be placed within the local network,
behind any firewall/router connections to
the Internet, or
• It can be placed externally to the local
network, on a separate sub-network or
with an open Internet connection.
Wherever in the network the SC5-4xIP is situated, you will need to determine
certain configuration issues such as address allocation and/or firewall adjustment
to allow correct operation. Please refer to
Configuration chapter for more details.
IMPORTANT: When an SC5-4xIP is accessible from the public Internet or dial up
connection, you must ensure that sufficient
LOCAL GLOBAL
USER USERS
IP
POWER
IN
CAM
COMPUTER
SYSTEM
Networking issues
within the
security measures are employed.
To connect the IP network port for global users
1 Depending upon where in the network the SC5-4xIP is being connected, run
a category 5, 5e or 6 link cable from the appropriate hub or router to the
SC5-4xIP unit.
2 Connect the plug of the link cable into the IP port on the front panel of the
SC5-4xIP unit.
4 x
I P
W
R
L A
Category , e or  cable
from LAN / network switch
3 Configure the network settings as appropriate to the position of the SC5-
4xIP within the network - see Networking issues
SC-xIP front panel
C O
N / T
N N
C P
/ I P E C
T I O
N P
E R
F E C
T I O
N
for details.