Table of Contents
Advertisement
What to do if the ADMIN password has been forgotten
If the ADMIN password becomes mislaid or forgotten, you will not be able to
access the SC5-4xIP to add or edit users and computer names, unless you have
given other users admin privileges. This situation may be resolved by performing
a complete reset to return the SC5-4xIP to factory settings.
IMPORTANT: A complete reset erases all the user names and computer
names that you have setup.
To clear a password (and restore factory default settings)
1 Remove power from the SC5-4xIP unit.
2 Press and hold the reset button on the
front panel (requires paper clip or similar).
3 Apply power and after a couple of
seconds release the reset button. The
Maintenance menu will be displayed
4 Highlight 'Reset Configuration' and
press
. The Reset Config warning will
be displayed
5 Highlight 'Reset' and press
settings will be returned to their factory
defaults and the previous Maintenance
menu will be re-displayed.
6 Remove power from the unit and then
re-apply it.
7 You now need to go through the
configuration procedure
and re-
instate all of the required settings.
. All
initial
0
Advertisement
Table of Contents
