Configuration; Overall Initial Configuration - Lindy SC5-4xIP User Manual

Configuration

Almost all configuration and operational aspects of the SC5-4xIP unit are
on-screen menu
controlled via

Overall initial configuration

When setting up a new installation, the following stages are recommended:
1 Enable the general 'Security'
With security disabled (default setting), a local or remote user attached to
the SC5-4xIP will have full and unrestricted access to all computers and all
SC5-4xIP settings. In larger installations, you are strongly recommended to
enable security and set up individual user accounts with access privileges.
2 Create an ADMIN (administration)
All SC5-4xIP units have a fixed user account that cannot be deleted or
renamed, called ADMIN. If you intend to use security, then it is important to
allocate a password to the ADMIN account.
3 Create user accounts and allocate access
Use the ADMIN account to add user profiles, passwords and access rights
for each of the system users.
4 Provide names for computers.
When numerous computers are attached, you are strongly advised to
provide names for each, to assist with recognition.
5 Configure the required 'Setup
Use the ADMIN account to determine key SC5-4xIP settings and timing
characteristics.
displays.
option.
password.
rights.
Options' and 'Global Preferences'