Power In Connection - Lindy SC5 User Manual

Power in connection

The SC5 unit is supplied with a standard 10W
power adapter. There is no on/off switch on
the unit, so operation begins as soon as a
power adapter is connected.
To connect the power supply
1 Attach the output lead from the power adapter to the
panel of the SC5.
output lead from
power adapter
LOCAL REMOTE
USER USER
U S
POWER
IN
CAM
COMPUTER
SYSTEM
socket on the rear
5V
SC rear panel
O P
T I O
N S
5 V
2 . 0
1 6
A
1
1 2
C O
1
M P
U T
2 Connect the IEC connector of the supplied country-specific power lead to
the socket of the power adapter.
3 Connect the power lead to a nearby main supply socket.
Note: Both the SC5 and its power supply generate heat when in operation and
will become warm to the touch. Do not enclose them or place them locations
where air cannot circulate to cool the equipment. Do not operate the equipment
in ambient temperatures exceeding 40 degrees Centigrade. Do not place the
products in contact with equipment whose surface temperature exceeds 40
degrees Centigrade.