Table of Contents
Advertisement
Unit Configuration
This page provides access to a selection of
both basic and fundamental settings for the
SC5-4xIP.
To get here
1 From a local keyboard, log on as the
'admin' user.
2 Press
(hotkeys can change).
3 Press
to show the Main Menu.
4 Select 'Configuration' and press
5 Select 'Unit Configuration' and press
Hardware
Indicates the version of the internal circuitry.
Firmware
Indicates the version of the internal software.
Keybd Layout
Use the arrow buttons to match the keyboard layout expected by the host
system.
Admin Passwd
Enter the password that will be used to gain administrator access to the SC5-
4xIP. There can only be one admin user and only that user is given access to
the configuration menus. The admin password background will be red until a
reasonably secure password has been entered, although this is only advisory as
any password or no password may be entered.
Unit Name
The name entered here will be displayed on the local menus and the remote
VNC/browser windows.
.
.
Time and Date
Use the left and right arrow keys to select the correct time and date. The time
entry uses the 24 hour clock notation. The internal real time clock will continue
to run for roughly one week without power to the unit, after that it will be lost
and require resetting. Use the up and down arrow keys to move between each
of the sections within the time and date entries.
Encryption
Three options are available: Always on, prefer off, prefer on. The one to choose
depends on the specific details of your installation - see
details. The use of encryption imposes a slight performance overhead of roughly
10% but is highly secure against third party intrusion.
Encryption settings
for
Advertisement
Table of Contents
