Pontiac Fiero 1988 Service Manual page 1116

Hide thumbs Also See for Fiero 1988:
Table of Contents

Advertisement

EXTERIOR LIGHTS
_
^
^
_
W - ; - . g . - ~W • . . w - w
• • • • : - ~ - W
High Level Stop Light
If the High Level Stop Light does not come
on:
• Check the Stop HAZ Fuse by operating
the Hazard Flasher.
• Check the Brake Switch and related
wiring.
• Check that G201 is clean and tight.
Front Park and Front Marker
1. If none of the Park or Marker Lights come
on:
COMPONENT
L O C A T I O N
5405
Rear lights
5406
Rear lights
S407
Rear lights
Page-Figure
harness, RH rear of car
201-14-A
harness, behind RH stop lights
201-14-A
harness, behind RH stop lights
201-14-A
• Check the Tail Fuse.
• Check the Light Switch and related wir-
ing.
2. If just the LH Front Park and Marker
Lights do not come on:
o Check power and ground to the bulb.
3. If just the RH Front Park and Marker
Lights don't come on:
• Check power and ground to the bulb.
License, Tail, or Rear Marker
1. If none of the License, Tail, or Rear Marker
Lights come on:
• Check the Tail Fuse.
• Check that G202 is clean and tight.
• Check that the Front Park/Front Marker
Lights come on.
— If they do go on, check connectors C500,
C401 and ground G202.
— If they do not go on, check the Light
Switch and related wiring.
(For GT Models Only)
If no Rear Pontiac Emblem Lights go on:
• Check the Fan E Fuse.
• Check that ground G202 is clean and
tight.
C I R C U I T OPERATION
Stop Lights
Voltage is applied to the Stop Lights through
the Stop HAZ Fuse, Brake Switch, and the
Turn-Hazard Switch Assembly. When the brake
pedal is depressed, the Brake Switch will close
and the Stop Lights will operate.
Turn Lights
Battery voltage is applied to the LH Stop-
Turn Light through the Turn B/U Fuse, Turn
Flasher, Hazard Switch, and the Turn-Left
Switches in the Turn-Hazard Switch Assembly.
Both Turn Left Switches close to the left at the
same time. When the switch connected to the
YEL wire closes, the LH Stop-Turn Light oper-
ates. When the Switch connected to the LT
BLU wire closes, the LH Front Turn Light and
the LH Turn Indicator light. They begin to
flash when current heats up the timing element
in the Turn Flasher, and it repeatedly opens and
closes the circuit.
The RH Turn Lights operate in a similar way
when the Turn Right Switches are closed to the
right.
(For SE Models Only)
If the Brake Switch is closed at the same
time as the Turn Left Switches, the LH Turn
Lights continue to operate through the Turn
Flasher. The RH Stop-Turn Light at the rear
glows steadily as long as the Brake Switch is
closed.
(For GT Models Only)
If the Brake Switch is closed at the same time
as the LH Turn Lights, the Brake Lights
remain on. The Turn Lights continue to operate
independently of the Brake Lights.
(Continued on next page)
>
I

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents