UPGRADE TOOL
To perform a firmware upgrade over the LAN or Internet, a Config Tool is provided on the CD or
www.digimerge.com. In an effort to continuously improve the functionality of our products,
firmware upgrades are available as a free download on www.digimerge.com.
NOTE: The Config Tool is supported on PC only. Firmware upgrades can also be completed
using the web browser interface (see "Upgrade" on page 33).
Installing a Firmware Upgrade Over the LAN
Prerequisites:
• Connect your IP camera to a router or switch on your network.
• Download a firmware upgrade from www.digimerge.com, if one is available. Extract the
contents.
To perform a firmware upgrade over the LAN:
1. Download the Config Tool from www.digimerge.com.
2. Extract the contents into a folder.
3. Open the folder and right-click ConfigTool.exe and Run as administrator. If a Windows
Firewall warning appears, click Allow Access. The Config Tool scans your LAN for IP
cameras.
4. Click Upgrade.
Click Upgrade
5. Check any IP cameras you would like to upgrade.
6. Click Open. Select the upgrade firmware file (.bin).
Upgrade Tool
38