Turning On/Off - Dog trace d–control 600 Service Instructions Manual

Turning ON/OFF

TURNING THE REMOTE CONTROLLER ON/OFF
To turn on: Press down for 1 second the
Turning on is indicated by lit LCD display.
To turn off : Again, press down for 1 second the
indicated by extinction of the LCD display.
TURNING THE RECEIVER (COLLAR) ON/OFF
The magnetic switching system located in the remote controller is used to turn the receiver
(collar) on and off .
To turn on: Touch the lower part of the remote controller for 1 second to the target on
the receiver (see the Fig.). The receiver indicator will start fl ashing green and this indicates
that the receiver is ready for use.
To turn off : Again, touch the lower part of the remote controller for 1 second to the target
on the receiver (see the Fig.). The LED indicator of the receiver will glow red. The receiver
is turned off .
Caution: To extend the battery life, it is
necessary to turn off the receiver and transmit-
ter whenever the training of your dog is
fi nished!!! If you do not use the equipment for
a long time, we recommend you to remove
the batteries from it.
The situation when the receiver is turned on/off and when
the transmitter is being matched with the receiver.
8
On/Off button on the remote controller.
On/Off button. Turning off is