Turning On/Off - Dog trace d–control 440 User Manual

Turning ON/OFF

TURNING THE REMOTE CONTROLLER ON/OFF
Turning on: Press down the
Turning on is indicated by lighting up of the LCD display.
Switching off : Again, press down the
Turning off is indicated by going out of the LCD display.
NOTICE: To save battery life time, the transmitter switches off automatically after
120 min. of inactivity.
TURNING THE RECEIVER (COLLAR) ON/OFF
A magnetic switching system located in the remote controller is used to turn the receiver (collar)
on and off .
Turning on: Place the lower part of the remote controller for 1 second to the target on the
receiver (refer to the Fig.). The receiver indicator will start blinking in green and this indicates that
the receiver is ready for use.
Turning off : Again, place the lower part of the remote controller
for 1 second to the target on the receiver (see the Fig.).
The LED indicator of the receiver will be lit red. The receiver
is turned off .
CAUTION: To save the battery life time, it is necessary to switch
off both transmitter and receiver after training!!! If you do not use
the device for a longer time period, it is recommended to remove
the batteries.
8
On/Off button on the remote controller for 1 second.
On/Off button for 1 second.
The situation when the receiver is turned on/off
and the transmitter is being matched with the receiver