Viewing Resource Allocation - Cisco PIX 500 Series Configuration Manual

Managing Security Contexts
Total active Security Contexts: 3
Table 6-2
Table 6-2
Field
Context Name
Interfaces
URL
The following is sample output from the show context detail command:
hostname# show context detail
Context "admin", has been created, but initial ACL rules not complete
Config URL: disk0:/admin.cfg
Real Interfaces: Management0/0
Mapped Interfaces: Management0/0
Flags: 0x00000013, ID: 1
Context "ctx", has been created, but initial ACL rules not complete
Config URL: ctx.cfg
Real Interfaces: GigabitEthernet0/0.10, GigabitEthernet0/1.20,
Mapped Interfaces: int1, int2, int3
Flags: 0x00000011, ID: 2
Context "system", is a system resource
Config URL: startup-config
Real Interfaces:
Mapped Interfaces: Control0/0, GigabitEthernet0/0,
Flags: 0x00000019, ID: 257
Context "null", is a system resource
Config URL: ... null ...
Real Interfaces:
Mapped Interfaces:
Flags: 0x00000009, ID: 258
See the Cisco Security Appliance Command Reference for more information about the detail output.
The following is sample output from the show context count command:
hostname# show context count
Total active contexts: 2

Viewing Resource Allocation

From the system execution space, you can view the allocation for each resource across all classes and
class members.
To view the resource allocation, enter the following command:
hostname# show resource allocation [detail]
Cisco Security Appliance Command Line Configuration Guide
6-16
shows each field description.
show context Fields
Description
Lists all context names. The context name with the asterisk (*) is the admin context.
The interfaces assigned to the context.
The URL from which the security appliance loads the context configuration.
GigabitEthernet0/2.30
GigabitEthernet0/0.10, GigabitEthernet0/1, GigabitEthernet0/1.10,
GigabitEthernet0/1.20, GigabitEthernet0/2, GigabitEthernet0/2.30,
GigabitEthernet0/3, Management0/0, Management0/0.1
Chapter 6 Adding and Managing Security Contexts
OL-12172-03