Preparing The Citrix Metraframe Server For Clientless Ssl Vpn Access; Creating And Installing The Citrix Plug-In - Cisco PIX 500 Series Configuration Manual

Configuring Browser Access to Client-Server Plug-ins

Preparing the Citrix MetraFrame Server for Clientless SSL VPN Access

The security appliance performs the connectivity functions of the Citrix secure gateway when the Citrix
client connects to the Citrix MetaFrame Server. Therefore, you must prepare the Citrix MetaFrame
Server, as follows:
Configure the Citrix Web Interface software to operate in a mode that does not use the (Citrix) "secure
Caution
gateway." Otherwise, the Citrix client cannot connect to the Citrix MetaFrame Server.
For Citrix instructions and parameter descriptions, refer to the Citrix Client for Java Administrator's
Guide. At the time of publication of this document, Citrix provided it for download on
http://support.citrix.com/servlet/KbServlet/download/6284-102-12977/ICAJava.pdf.
If you are not already providing support for a plug-in, you must follow the instructions in
Note
the Security Appliance for a Plug-in" section on page 37-25

Creating and Installing the Citrix Plug-in

Create and install the Citrix plug-in, as follows:
Download the ica-plugin.zip file from the Cisco web site to your workstation.
Step 1
This zip file contains files that Cisco customized for use with the Citrix plug-in. After you import the
Citrix plug-in into the security appliance, and the remote browser downloads it, the portal page displays
the icon.gif image contained in the ica-plugin.zip file. The user clicks the image to establish a connection
with a Citrix server.
Download the Citrix Presentation Server Client file to your workstation.
Step 2
Note
Unpack the following files from the Citrix Presentation Server Client file:
Step 3
•
•
Step 4 Add the unpacked files to the ica-plugin.zip file.
For example, use WinZip to add the jar files to the zip file.
Step 5 Make sure a TFTP or FTP service is running on the Linux host on which you built the plug-in before
continuing.
Step 6 Open a CLI session with the security appliance and install the plug-in by entering the following
command in privileged EXEC mode:
import webvpn plug-in protocol ica URL
URL is the host name or IP address and path of the plug-in on your workstation.
Cisco Security Appliance Command Line Configuration Guide
37-28
At the time of publication of this document, Citrix provided the Citrix Presentation Server Client
file for download on http://www.citrix.com
JICA-configN.jar
JICA-coreN.jar
Chapter 37 Configuring Clientless SSL VPN
before using this section.
at the following path: Download > Clients.
the"Preparing
OL-12172-03