Cisco PIX 500 Series Configuration Manual page 103

Chapter 6 Adding and Managing Security Contexts
Configuring Resource Management
For example, you might want to create a class that includes the admin context that has no limitations.
The default class has all resources set to unlimited by default.
To set a particular resource limit, enter the following command:
•
hostname(config-resmgmt)# limit-resource [rate] resource_name number [%]
For this particular resource, the limit overrides the limit set for all. Enter the rate argument to set
the rate per second for certain resources. For resources that do not have a system limit, you cannot
set the percentage (%) between 1 and 100; you can only set an absolute value. See Table 6-1 for
resources for which you can set the rate per second and which to not have a system limit.
Table 6-1 lists the resource types and the limits. See also the show resource types command.
Cisco Security Appliance Command Line Configuration Guide
6-5
OL-12172-03