Cisco PIX 500 Series Configuration Manual page 730

Chapter 33 Configuring Network Admission Control
Changing Global NAC Framework Settings
For example, enter the following command to change the wait period before initiating a new EAP
over UDP association to 120 seconds:
hostname(config)# eou timeout hold-period 120
hostname(config)#
To change the session reinitialization to its default value, use the no form of this command, as
follows:
no eou timeout hold-period
For example:
hostname(config)# no eou timeout hold-period
hostname(config)#
Cisco Security Appliance Command Line Configuration Guide
33-12
OL-12172-03