Uninstalling batteries/battery cables:
●
Remove the batteries, as described in chapter 8.4.1.
Positive terminal (+):
●
Remove the cable ties (1) with side cutting pliers.
●
Lift the battery terminal cap (2) off and move it up the cable and out of the way.
●
Use an 11 mm socket wrench to loosen the battery terminal screw (3).
●
Remove the battery terminal screw together with both washers and the cable lug (5) from the
battery terminal (4).
Negative terminal (-):
●
Repeat the steps of the procedure for the positive terminal on the negative terminal of the
battery.
●
Replace the batteries and/or the battery cables.
Installing batteries/battery cables:
●
Assemble the parts in reverse order. Connect the negative terminal first, then the positive
terminal.
●
Make sure the battery box sockets and plugs are correctly installed. A schematic showing the
correct positions can be found in the battery box cover.
●
Carefully reposition the battery terminal caps and secure them with a cable tie to prevent them
from possibly slipping out of place.
52