Replacing The Tail Lamp Bracket (Conventional Lighting System) - Invacare FDX Service Manual

8.5.9

Replacing the tail lamp bracket (conventional lighting system)

Requirements:
● 3 mm Allen key
Uninstalling the head lamp bracket:
●
Remove the front, rear and lateral covers, as described in chapter 8.1.1, 8.1.2 and 8.1.3.
●
Uninstall the complete tail lamp assembly, as described in chapter 8.5.8.
●
Use the 3 mm Allen key to loosen
and remove both screws (2).
●
Replace the lamp bracket (1).
Installing the head lamp bracket:
●
Assemble all parts again in reverse order.
●
Check all vehicle functions.
66