Uninstalling electronic modules:
●
Remove the rear cover, as described in chapter 8.1.2.
●
Take exact note of the positions of all cables and the sockets that they are connected to. Mark
the connectors and sockets or take a photograph with a digital camera.
●
The illustration shows the electronic module (1) and the optional actuator module (2). The
optional lighting circuit board is not shown in the picture, but it would be installed at position (3)
if it was present.
●
Disconnect the plugs (1) from the electronic module and, if installed, from the optional actuator
module and the optional lighting circuit board.
40