Replacing The Head Lamps Completely (Led Lighting System) - Invacare FDX Service Manual

8.5.4

Replacing the head lamps completely (LED lighting system)

Requirements:
● 3 mm Allen key
● Side cutting pliers
● Cable ties
Uninstalling head lamps:
●
Remove the rear cover, as described in chapter 8.1.2.
●
Take exact note of the positions of all cables and the sockets (1) that they are connected to.
Mark the connectors and sockets or take a photograph with a digital camera.
● Disconnect the cable of the affected head lamp from the lighting circuit board.
● Remove all cable ties and pull the cable out of the wheelchair.
● Loosen the hexagon socket head screw (1) with a 3 mm Allen key and remove the head lamp
from the bracket.
● Replace the head lamp.
60