Oven Light - Parmco PPOV-6S-DT-2 Installation And Operating Instructions Manual

Start Cooking Now and set the Finish Time
1. Press button, set cooking finish time with + and – buttons. (Up to 23 hours and
59 minutes).
2. Set cooking temperature and cooking mode by turning the thermostat knob and
mode selector knob.
 The oven starts immediately,
reached, the oven automatically stops cooking. The alarm will ring and "AUTO"
will flash. Press the alarm bell to stop the ringing.
 When the
time is displayed. If the
semi-automatic setting will be cancelled. When the
the oven will revert back to manual mode.
Timer
The digital timer can be set up to 23 hours and 59 minutes maximum.
1. To set the timer, press the function button repeatedly until the square bar above
the symbol flashes, and adjust the time by pressing the + or – buttons. The
timer countdown will begin to work.
2. When it reaches the set time, the square bar above the symbol begins to flash
and the alarm will ring. To stop the alarm ringing, press any button.
NOTE: when making time and mode selections they must be entered within 5 seconds.
In case of power failure, all settings including the time display will be lost. When the
power is restored, three '0' and "AUTO" will be displayed.

Oven Light

Set the cooking mode selection knob to the light symbol
lights. The oven lights will stay on while the oven is operating.
Cooling / Ventilation
In order to keep the exterior of the appliance cool, the appliance is fitted with a cooling
fan that operates automatically. When the oven is on, the cooling fan turns on and you
will notice a flow of air exiting between the door and control panel.
NOTE: When cooking is finished, the cooling fan will continue operating until the oven
has cooled down. The cooling fan will then turn off automatically.
and "AUTO" will flash. When the finish time is
button is pressed during semi-automatic cooking, the set cooking
button is pressed and the time set back to 0, the
button is pressed again,
to switch on the oven
9