Operating Instructions - Parmco PPOV-6S-DT-2 Installation And Operating Instructions Manual

Setting the Clock:
Once the oven has been connected to the electrical power, the display will show
"12:00" with a square bar highlighted above the
 Press the + or – button to increase or decrease the number until it reaches the
correct time. After 5 seconds the clock is set and will start automatically.
ote: The clock is 24 hours, and must be set for the oven to function!
Automatic Cooking Time Setting:
Automatic setting of the oven allows you to select the end time, cooking time,
temperature and cooking mode. The oven will switch on, cook according to the selected
cooking mode and temperature and then switch off automatically.
1. Press the function button repeatedly until the highlighted bar above the
symbol flashes. Set the cooking time with the + and – buttons.
2. Press the function button repeatedly until the highlighted bar above the
symbol flashes. Set cooking finish time with + and – buttons.
3. Select the cooking function and temperature with the control knobs. The symbols
above and
After the above setting, "AUTO" will illuminate, which means the automatic cooking
feature of the oven is set.
For Example: If cooking time takes 45 minutes and you want it to finish at 14:00:
1. Press button, set the cooking time to 45 minutes with the + and – buttons.
2. Press button, set finish time to 14:00 with + and – buttons.
1. Set cooking temperature and cooking mode by turning the thermostat knob and
mode selector knob.
 After the above setting, the current time is displayed and "AUTO" will flash,
indicating that the automatic cooking feature is set. When the clock displays
13:15, the oven will start cooking automatically.
 While cooking, "AUTO" and
oven automatically stops cooking. The alarm will ring and "AUTO" will flash.
Press button and the ringing will stop.

OPERATING INSTRUCTIONS

will flash indicating the cooking procedure has been set.
will flash. When the clock displays 14:00, the
symbol.
8