Table of Contents
Advertisement
Correct placement of the shelves between the side rails is imperative for safety
operation. This will ensure that during the tray or shelf removal, hot food items will not
slide out!
TROUBLESHOOTING
Sometimes simple things can appear to be a problem with the product. The FAQ's
below are offerred as a guide to help before calling Parmco only. If you need extra
advice please contact Parmco on (09) 573 5678 or sales@parmco.co.nz. Please have
your serial number and proof or purchase ready as these will be needed to initiate
any service call.
Q: What should I do if the oven doesn't heat up?
A: Check to see if one of the following actions resolves the issue:
● The oven may not be switched on. Switch the oven on.
● The clock may not be set. Set the clock (see section "Setting the clock").
● Check to see if the required settings have been applied.
● A household fuse may have blown or a circuit breaker may have tripped. Replace the
fuses or reset the circuit. If this happens repeatedly, call an authorised electrician.
Q: What should I do if, even though the oven function and temperature have been
set, the oven does not heat up?
A:There may be problems with the internal electrical connections. Contact Parmco
Q: What should I do if an error code appears and the oven does not heat up?
A: There is a fault in the internal electrical circuit connection. Contact Parmco
Q: What should I do if the time display is blinking?
A: There was a power failure. Set the clock (see section "Setting the clock").
Q: What should I do if the oven light doesn't illuminate?
A: The oven light is faulty. Replace the oven light bulb (see section "Changing the
lamp").
Q: What should I do if the oven's fan is running without having been set?
A: Following use, the oven's fan runs until the oven has cooled down.
16
Hide quick links:
Advertisement
Table of Contents
