Operating Instructions - Parmco PPOV-6B-9 Installation And Operating Instructions Manual

1. SETTING THE CLOCK
After the unit is connected to power, the symbols 0:00 will be displayed on the control
panel.
 Press
and the hour indicator will flash.
 Press
 Press
and the minute indicator will flash.
 Press
 Press
to finish the clock settings. ":" will flash.
Note: The clock uses a 24 hours format and must be set for the oven to function!
2. SEETING FUNCTION AND TEMPERATURE
 Press
to choose the desired cooking function and the indicator will come on.
 Press
 Press
to confirm the start of cooking. The default temperature for that
cooking function will be displayed. The selected temperature will flash until the
temperature has been reached, then it will beep and stop flashing.
Note:
The step quantities for time adjustments of the coding switch are:
 0 -- 0:30min: step 1 minute
 0:30--9:00 hours: step 5 minutes
 The step quantity for temperature adjustment is 5° C. The default temperature
for Light and Defrost functions
 Press
start cooking. If
previous time and continue cooking.
 Press
to adjust the temperature when cooking begins. The corresponding
indicator will flash, then press
seconds, the oven will revert to the default temperature setting.
3. LIGHT
 After a cooking function is selected and the start button
symbol will flash

OPERATING INSTRUCTIONS

to adjust the hour digits, time should be within 0-23 hrs.
to adjust the minute digits, time should be within 0-59 min.
to adjust the temperature.
to adjust the cooking time when cooking begins, then press
is not pressed within 3 seconds, the oven will revert to the
cannot be adjusted.
to start cooking. If
to
is not pressed within 3
pressed, Light
6