Table of Contents
Advertisement
SAFETY INSTRUCTIONS
The appliance becomes very hot during operation. Take care not to touch the heating elements inside the oven.
WARNING: Accessible parts may become hot during use. To avoid burns, please take care around the appliance
and keep young children away.
Keep main leads of adjacent appliances from being caught in the door of the oven to avoid damage.
Never place pans or other items on the open door of the oven.
Do not use the oven in the event of a technical fault. Once a technical fault occurs, disconnect the power and report
the fault to the service centre to be repaired.
Never clean the oven with the high-pressure steam cleaning device, as it may damage the electrical components.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the door glass as they can scratch the surface,
which could then result in the glass shattering.
The rules and provisions contained in this instruction manual should be strictly observed. Do not allow anybody
who is not familiar with the contents of this instruction manual to operate the oven.
If the supply cord is damaged, it must be replaced by the manufacturer, a service agent or similarly qualified
persons in order to avoid a hazard.
The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved.
Cleaning and user maintenance should not be undertaken by children without supervision.
WARNING: Ensure that the appliance is switched off before replacing the lamp/light to avoid the possibility of
electric shock.
2
Advertisement
Table of Contents
