Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
STEP 1- CHECK DOOR BALANCE
With another person holding the dishwasher to prevent it from tipping, open the
door slowly. If the door drops when released, increase the spring tension. If the door
closes when released, decrease the spring tension.
To adjust the spring tension:
1. Pull the spring adjustment pin out of the holes. Insert the pin into the next
highest or lowest hole.
2. Move the spring adjustment pins to the same holes on both the left-hand and
right-hand sides.
3. Retest the door, and continue moving the spring adjustment pin until the door is
balanced.
Increase
Decrease
11
Advertisement
Table of Contents
