Step 9 - Position Dishwasher Under Countertop; Step 10 - Level The Dishwasher - Haier HDBL655AFS Installation Instructions Manual

STEP 9 – POSITION DISHWASHER UNDER
COUNTERTOP
1. Push dishwasher completely into the opening so that the front corners of the
dishwasher door are flush with the cabinet doors.
NOTE: It is all right if the dishwasher fits tightly into cabinet opening. Do not remove
insulation blanket – the blanket reduces the sound travel.
Reposition dishwasher by grasping
both sides with hands.

STEP 10 - LEVEL THE DISHWASHER

IMPORTANT: Dishwasher must be level for proper dish rack operation and wash
performance.
1. Align front of dishwasher door panel with cabinet doors. You may need to adjust
alignment to be even with your cabinets.
NOTE: Prop up one side of frame to hold dishwasher up off floor when adjusting
front legs. With some installations, it may be easier to adjust the front leg using a
6" adjustable wrench.
2. Check that the leveling legs are firmly against the door.
3. Close and latch the door, and place level against the front panel. Check that
dishwasher is plumb. If needed, adjust leveling leg or add shims until dishwasher
is plumb.
NOTE: Shims must be securely attached to floor to prevent their movement
when the dishwasher is operated.
4. Repeat for other side of dishwasher.
22
Do not push against front door panel
with knee. Damage to the door panel
will occur.