Installation Instructions; Step 1- Unpack The Dishwasher; Step 2- Check Door Balance - Haier HDBL865ATS Installation Instructions Manual

24" built-in dishwasher
Hide thumbs Also See for HDBL865ATS:
Table of Contents

Advertisement

INSTALLATION INSTRUCTIONS

STEP 1- UNPACK THE DISHWASHER

To avoid danger of suffocation, keep plastic bag and other packing
material away from babies and children. Do not use this bag in cribs,
carriages and playpens. The plastic bag could block nose and mouth
and prevent breathing. This bag is not a toy.
Failure to follow these instructions can result in death or brain damage.
Use two or more people to move and install dishwasher.
Failure to do so can result in back or other injury.
1. Remove and properly dispose of/recycle all packing material.
2. Stand dishwasher upright.

STEP 2- CHECK DOOR BALANCE

With another person holding the dishwasher to prevent it from tipping, open the
door slowly. If the door drops when released, increase the spring tension. If the door
closes when released, decrease the spring tension.
To adjust the spring tension:
1. Pull the spring adjustment pin out of the holes. Insert the pin into the next
highest or lowest hole.
2. Move the spring adjustment pins to the same holes on both the left-hand and
right-hand sides.
WARNING
Suffocation Hazard
WARNING
Excessive Weight Hazard
11

Advertisement

Table of Contents
loading

Table of Contents