Step 16 - Test Dishwasher - Haier HDBL655AFS Installation Instructions Manual

STEP 16 - TEST DISHWASHER

1. Connect to power supply.
DIRECT WIRE METHOD:
Electrically ground dishwasher.
Connect ground wire to green ground connector in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death, re, or
electrical shock.
•
Turn on power at source.
POWER SUPPLY CORD METHOD:
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or electrical shock.
•
Plug into a grounded 3 prong outlet.
•
Make sure the power cord does not touch the dishwasher motor or the lower
part of the dishwasher tub.
2. Close door and turn on dishwasher.
WARNING
Electrical Shock Hazard
WARNING
Electrical Shock Hazard
31