Installation - Haier ESD310 Service Manual

Serial Number:
3/4"(1.9 cm)
insulation-may
be compressed

5.Installation

5.1 Tools and materials needed
A. pliers
C. 5/8"open end wrench
E. 10" adjustable wrench that opens to 1-1/8"(2.9cm)
F. flat-blade screwdriver
H. utility knife
I. 2 twist-on wire connectors, which are the proper size to connect your household
wiring to 16-gauge wiring in dishwasher
J. small level
L. 90° bow with 3/8" N.P.T external threads on one end.(The other end must fit your water
supply line.)
M. flashlight
O. shallow pan
P. Shim stock (if installed with built-up floor)
P. electric drill
R. small tubing cutter
T. 1-1/2"-2" screw-type clamp if connecting to waste-tee U. copper tubing (3/8"
recommended) or flexible stainless steel braided fill line V. clamp connector or conduit
connector to fit a 7/8"(2.2cm) diameter hole
Version:00.00
Built-In Dishwasher
33-7/8"(86cm) min.with
wheels removed
B. Phillips screwdriver
D. measuring tape or ruler
G. gloves
K. safety glasses
N. Teflon® tape or pipe joint compound
Q. 1/2", 3/4"and 1-1/2" hole saw bits
S. wire stripper
Model: ESD300/ESD301/ESD302/310/311/312
Edition: Nov.-23-2005
Page 5 / 47